MYERS S50HT SERIES High-capacity sump, effluent, boiler blow-down

MYERS S50HT SERIES High-capacity sump, effluent, boiler blow-down S50HTPC1

The Myers S50HT series high-flow pump is designed for dependability in demanding environments. All cast iron
construction and special features to protect the motor make this a pump for the long haul. The
S50HT in a boiler blow-down application can withstand liquid temperatures up to 200°F. The
non-clogging, semi-open impeller ensures unimpeded flow for high-capacity sump operation.

SPECIFICATIONS:

Capacities – 100 GPM (378 LPM)

Shut-off Head – 50’ (15.2 m)

Max. Spherical Solids – 3/4” (19 mm)

Liquids Handling – Domestic effluent anddrain water

Max. Liquid Temperature – 200°F (93°C)

Motor/Electrical Data – 1/2 HP, 3450

RPM, PSC with thermal overload, 115V, 12 FLA, 1Ø, 60H

Acceptable pH Range – 5-9

Specific Gravity – .9-1.1

Viscosity – 28-35 SSU

Discharge, NPT – 2” (50 mm)

Housing – Cast iron

Minimum Sump Diameter :

Simplex: 24” (61 cm)
Duplex: 36” (91.4 cm)

Power Cord – 20’, 16/4, SOOW, SOOW-A

Shaft Seal – Durable silicon carbide

Float Switch On/Off :

On – 17.8” (452)
Off – 8.8” (224)

Features:
Tough Against Corrosion Cast iron housing, volute case and impeller resist the most extreme environments

Stainless Steel Protection
Stainless steel motor shaft, impeller lock nut and external hardware

Built-in Overload Protection
Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature

Smooth Running Semi-open impeller is designed to resist clogging

Cool-running
Oil-filled motor provides continuous bearing lubrication and maximizes heat dissipation

Extended Service
Fully lubricated ball bearings and shaft seal for longer service life

High-flow Discharge
2” (50 mm) NPT discharge

Height Adjustable
Legs are drilled and tapped with 1/2” NPT threads to allow pump height adjustment